LEGAL

Threebrook CraftEye Software License Agreement

Version 1.0 Effective November 13, 2026

This English text is a translation for convenience. If it differs from the Chinese version, the Chinese version governs.

Important: please read this agreement carefully before you install, copy or use the software, especially the terms in bold that exclude or limit the Licensor’s liability, limit your rights or set out how disputes are resolved. By installing, copying or using the software you confirm that you have read, understood and agreed to all of these terms. If you do not agree, do not install or use the software; if you have already paid, the purchase contract governs what happens next.

1. Definitions

  1. Licensor: Zhuhai Threebrook Technology Co., Ltd. (“we” or “us”).
  2. Licensee / you: the company, other organization or individual that has obtained a license to use the software.
  3. The software: the Threebrook CraftEye (三溪匠眼) industrial vision inspection software, together with its updates, patches, sample projects, model files, manuals and other accompanying materials.
  4. License file: the electronic license we issue from the request code you send us, bound to a specific computer, or a hardware dongle we supply. It states the customer, the edition (Runtime or Developer), the optional modules and the term.
  5. Project: the inspection flows, parameters, templates and related data you build and configure with the software.

2. License

  1. Provided you comply with this agreement and pay the agreed fees, we grant you a non-exclusive, non-transferable, non-sublicensable license to install and use the software on the computer named in the license file, for your own business purposes, within the edition, modules and term stated in the license file.
  2. Each license file covers one computer. To move to another computer you must apply to us again; the old license then becomes void and may no longer be used.
  3. Trial: without a license file, the software offers a 30-day trial from the first launch. The trial is for evaluation only. We give no warranty and accept no liability for use during or after the trial. When the trial ends, the software’s functions are restricted.
  4. When the term ends, the software keeps running during a grace period; after that it can only be used to view, not to run inspections. Renewal is purchased separately.
  5. All rights not expressly granted in this agreement are reserved by us.

3. Restrictions

Except where the law expressly allows it, you may not:

  1. reverse engineer, decompile or disassemble the software, or otherwise try to obtain its source code;
  2. circumvent, crack, modify or disable license checks, trial limits, time checks, dongles or other technical protection measures, or tamper with license files or trial records;
  3. rent, lend, resell or distribute the software or license files, or use them on computers outside the scope of the license;
  4. remove or alter copyright, trademark or other rights notices in the software;
  5. use the software to develop a product that competes with it, or for any unlawful purpose.

If you breach this section, we may terminate the license immediately and claim compensation for the resulting losses.

4. Intellectual property

  1. Copyright, trademarks and other intellectual property in the software (including code, algorithms, interface, documentation and models) belong to us or the relevant rights holders and are protected by the Copyright Law of the People’s Republic of China, the Regulations on the Protection of Computer Software and other laws and international treaties. This agreement transfers no intellectual property.
  2. Your projects, images and inspection data belong to you. We may use feedback and suggestions you send us to improve the product, free of charge.

5. Third-party components

The software includes third-party open-source or commercial components (listed under third-party licenses on the About page). They are licensed under their own terms; where this agreement conflicts with those terms, those terms prevail.

6. Data and the AI assistant

  1. Inspections run locally on your computer. We do not collect your images or inspection data.
  2. When you choose to use the AI assistant module, it sends the text you type, any images you choose to attach and the necessary project content to a third-party cloud model service for processing. Before using it, make sure this data may be sent outside your organization; if it may not, do not use the AI assistant, or have an administrator turn it off. The AI assistant’s suggestions may be wrong; you must check any flow or parameter changes made from them before relying on them.
  3. Please back up your projects and data yourself. We are not liable for data loss caused by a lack of backups, computer failure, operating mistakes, viruses or similar causes.

7. Your responsibilities

  1. The software is an aid to inspection. Results depend on imaging conditions, lighting, cameras, mounting, variation between parts, parameter settings and many other factors, and cannot be 100% accurate. Before putting it into service you must validate the inspection flows thoroughly with your real parts, keep monitoring them in use, and put suitable quality controls in place such as re-inspection and sampling. You make, and are responsible for, the final decision to accept or reject any product.
  2. The software is not designed for life support, personal safety protection, nuclear facilities, aircraft or spacecraft flight control, or any other use where a failure could directly cause death, injury or serious environmental harm. Without our written consent you may not use it as the sole or main safety safeguard in such a system.
  3. When the software works with cameras, PLCs, I/O and other equipment, you are responsible for choosing, wiring and safeguarding that equipment (emergency stops, interlocks and so on).

8. Warranty and disclaimer

  1. If, within 90 days of delivery, the software does not substantially work as described in the manual, you may tell us and we will fix it or provide a workaround within a reasonable time; if it cannot be fixed, we may refund the fees paid for that license. This is your only remedy under this section.
  2. Except as expressly stated in the paragraph above, and to the fullest extent permitted by law, the software is provided “as is”, and we make no other warranty, express or implied, including any warranty of merchantability, fitness for a particular purpose, non-infringement, or error-free or uninterrupted operation.

9. Limitation of liability

  1. To the fullest extent permitted by law, we are not liable for any indirect, incidental, special or consequential loss arising from the use of or inability to use the software, including lost profits, production or line stoppages, product recalls, rework, customer claims, data loss or loss of goodwill, even if we have been told such loss is possible.
  2. To the fullest extent permitted by law, our total liability under this agreement is limited to the fees you actually paid us for the license giving rise to the claim in the twelve months before the claim arose; for trial and free licenses the limit is zero.
  3. This section does not exclude or limit liability that cannot be excluded or limited by law, including liability for property loss caused by our intentional misconduct or gross negligence, and liability for personal injury.

10. Updates and support

  1. The scope and duration of updates and technical support during the term are set by the purchase contract or the service policy we publish. This agreement does not by itself include on-site service, custom development or upgrades to new versions.
  2. Updates may come with revised license terms; by installing or using an update you accept the revised terms.

11. Termination

  1. If you breach this agreement, we may terminate the license by written notice (immediately for a breach of section 3).
  2. When the license is terminated or the term (including any grace period) ends, you must stop using the software and delete it and the license file. Sections 3, 4 and 8 to 12 survive termination.

12. General

  1. Export control: you must comply with applicable import and export control laws and must not use the software for prohibited countries, regions, parties or purposes.
  2. This agreement is governed by the laws of the People’s Republic of China (for this purpose excluding the laws of Hong Kong, Macao and Taiwan) as to its formation, validity, interpretation, performance and dispute resolution.
  3. Any dispute arising from or relating to this agreement shall first be settled by friendly negotiation; failing that, either party may bring a lawsuit in the competent people’s court where the Licensor is domiciled (Zhuhai, Guangdong Province).
  4. If any term of this agreement is held invalid or unenforceable, the other terms remain in effect.
  5. If a separate written purchase contract between you and us differs from this agreement, the purchase contract prevails; for anything it does not cover, this agreement applies.
  6. Contact: support@threebrook.com